BIẾN TẦN

Biến Tần Sanch S3000-Series

GIÁ: LIÊN HỆ
  • Tel: 08-62974701 - 02 - 03 
  • Fax: 086297474  
  • Hotline: 0903 733 151  - 0983 533 151  
  • Email: thaibinhdhl@gmail.com 
Đặt hàng

Product Description

Specifications:
1) Rated voltage: 440V / three phase
2) Power range: 5.5 ~ 55kW
3) Output frequency: 0.1 ~ 400Hz

Features:
1) Automatic setting for acceleration / deceleration
2) 16-level preset table speed, switch of 4-level accelerating/decelerating time
3) RS-485 in-line interface build-in
4) Automatic control of motor parameters, precise location control
5) Automatic voltage regulation (AVR)
6) All-dimensional protection
7) Includes PID circuit control
8) Senseless vector control
9) Program and vector control of fan and water pump makes it more economical

Input Voltage Level 440V level
ModelS3000-***/***43* 055 075 110 150 185 220 300 370 450 550 750
Apply for rated power of  5.5 7.5 11 15 18.5 22 30 37 45 55 75
3-f MOTOR(KW)
Apply for rated power of  7.5 10 15 20 25 30 40 50 60 75 100
3-f MOTOR(HP)
Contant torque output  13 18 24 32 38 45 60 73 91 110 150
current
Variable torque output 16 22 30 40 47 56 75 91 113 138 188
cureent
Rated output capacity(kva) 9.9 14 18 24 29 34 46 56 69 80 100
Maximum output voltage(v) Three-phase power supply 380~440V corre
sponding to input voltage
Rated input voltage/frequency 380/400/415/440Vcorrespongding to input
voltage
Operating voltage/frequency 340~500VAC, 47~63Hz
Control system Selection of sine wave PWM
vector control; torque control; V/F
Activating torque Activating toque is more than 150%in0.5HZ
Control range of speed 1: 100(can be up to 1: 1000 when have 
external PG)

 

 

 
Control precision of speed  +-0.5%(can be up to +-0.02%)
Speed reactivity 5Hz(can be up to 30Hz under vector control)
Maximum output frequency(HZ) 0.00 to 400.00Hz
Frequency output precision Digit instruction +-0.005%,
analog instruction +-0.5%
Frequency setting resolution Digit instruction 0.01Hz, analog instructio
n: maximum output frequency is 1/1000(bit)
Torque limit Maximum 200% torque current
Torque precision +-5%
Accelerating/deceleratingtime 0.00~600.00 seconds/0.00~6000.00 seconds
V/F curve Randam V/F curve based on four points&
quadratic curve
Frequency setting signal +10V, +-10V, 4~20mA, pulse wave input
Dynamic brake About 20%
Motor protection Electronic thermocouple protection
` Current restrain 170%, over-current protect
ion 200% of rated current
Ground protection for current Current leakage protection; 50% peak value
leakage of rated current
Overload capacity Constant/variable torque 150% for 
60 seconds, 200% for 2 seconds
Voltage protection Over-voltage position: Vdc> 400/800v
low-voltage position: Vdc< 200/400v
Over-voltage protection for Surge wave absorber(MOV)
input power supply
Over-heat protection Built-in temperature sensor
instantaneous power-off  Parameter setting can be up to 5 seconds
compensation
Protection level NEMA 1/IP21
Operating temperature -10 ~ 40 for UL & -10 ~50 for CE
Storage temperature -20 ~60
Humidity Below 90%RH(non-condensing)
Vibration 1.0G below 20Hz, 0.6G at 20~60HZ
Cooling system Air-blasst cooling(RUN, STOP)
Mounting height Lower than 1000m
Keep from corrosive gases, liquid and dust
 

 


Sản phẩm cùng loại

r5b

mhcamung

Lượt truy cập

6362732
Hôm nay
Hôm qua
Tuần này
12447
22847
65277

CÔNG TY TNHH KỸ THUẬT ĐIỆN HIỆP LỰC

Trụ sở: 97/4 KP.2, P. Thới An, Q.12, TPHCM

    VPGD: 32/1 Lê Văn Huân, P13, Q.Tân Bình, TPHCM

028.6297.4701 / 702 / 703

thaibinhdhl@gmail.com

Thống kê truy cập

Hôm nay
Hôm qua
7 ngày qua
Lượt truy cập:
12447
22847
65277
6362732