CẢM BIẾN

Cảm Biến Banner U-GAGE S18U Series

GIÁ: LIÊN HỆ
  • Tel: 08-62974701 - 02 - 03 
  • Fax: 086297474  
  • Hotline: 0903 733 151  - 0983 533 151  
  • Email: thaibinhdhl@gmail.com 
Đặt hàng
Range 30 to 300 mm
Supply Voltage and Current 10 to 30V dc (10% max. ripple) @ 65 mA max (exclusive of load)
Ultrasonic Frequency 300 kHz Rep. rate:2.5 milliseconds
Supply Protection Circuitry Protected against reverse polarity and transient overvoltages
Output Configuration Bipolar:One NPN (current sinking) and one PNP (current sourcing). SPST solid-state switch conducts when target is sensed within sensing window.
Output Rating 100 mA max. OFF-state leakage current:less than 5 µA
Output saturation:
NPN:less than 200 mV @ 10 mA; less than 600 mV @ 100 mA
PNP:less than 1.2V @ 10 mA; less than 1.6V @ 100 mA
Output Protection Protected against short circuit conditions
Output Response Time 5 milliseconds
Delay at Power-up 300 milliseconds
Temperature Effect 0.02% of distance/° C
Repeatability 0.5 mm
Hysteresis 0.7 mm
Minimum Window Size 5 mm
Adjustments Sensing window limits:TEACH-Mode programming of near and far window limits may be set using the push buttons or remotely using TEACH input.
Indicators Power/Signal Strength (Red/Green):
Green:target is within sensing range
Red:target is outside sensing range
OFF:sensing power is OFF
TEACH/Ouput indicator (Yellow/Red):
Yellow:target is within taught limits
Red:sensor is in TEACH mode
OFF:target is outside taught window limits
Remote TEACH Impedance:12 k ohms
Construction Threaded barrel:thermoplastic polyester
Push-button housing:ABS/PC
Push-button:santoprene
Lightpipes:acrylic
Environmental Rating Leakproof design, rated IEC IP7; NEMA 6P
Connections 5-conductor (with drain) 2 m or 9 m shielded PVC-jacketed attached cable, or 5-pin Euro-style quick-disconnect fitting. QD cables are ordered separately.
Operating Conditions Temperature:-20° to +60° C
Relative humidity:100%
Vibration and Mechanical Shock All models meet Mil. Std. 202F requirements. Method 201A (Vibration: 10 to 60 Hz max. double amplitude 0.06", maximum acceleration 10G). Also meets IEC 947-5-2 requirements: 30G, 11 milliseconds duration, half-sine wave.
Temperature Warmup Drift Less than 1.7% of sensing distance upon power-up
Application Note Objects passing inside the specified near limit may produce a false response.

 

 

Sản phẩm cùng loại

r5b

mhcamung

Lượt truy cập

2855894
Hôm nay
Hôm qua
Tuần này
7481
8967
55487
Bộ điều chỉnh lực căng dùng để điều khiển lực căng trong ngành bao bì, giấy..
Giới thiệu PLC Mitsubishi là sản phẩm của tập đoàn Misubishi (tập đoàn công nghệ hang đậu Nhật Bản ). Là bộ...
Nếu bạn muốn làm giàu, hãy tận dụng lời khuyên từ những người đã thành công. Bên cạnh đó, một yếu tố không...

CÔNG TY TNHH KỸ THUẬT ĐIỆN HIỆP LỰC

Trụ sở: 97/4 KP.2, P. Thới An, Q.12, TPHCM

    VPGD: 32/1 Lê Văn Huân, P13, Q.Tân Bình, TPHCM

028.6297.4701 / 702 / 703

thaibinhdhl@gmail.com

Thống kê truy cập

Hôm nay
Hôm qua
7 ngày qua
Lượt truy cập:
7474
8967
55480
2855887